Step 1 - Prep
- Remove all impact protectors
- Undo all zippers, Velcro and buckles
- Shake off any surface dirt
- Use a soft brush if required
- Shake off any surface dirt
- Flip inside out
Step 2 - Which Detergent?
- Use (in order of preference)
- Purpose-made tech-wash
- Neutral unscented liquid detergent
- Woolen liquid detergent
- Baby shampoo
Completely Avoid
- Any type of granular powder detergent
- Any type of heavily scented liquid detergent
Step 3 - Soak
- Dissolve 1 cap of detergent, in a bucket of lukewarm water.
- Soak for at least 30 minutes
- Avoid hot water. Test with your fingers first. If it’s too hot for your fingers, it's too hot for your gear.
- While soaking, make sure to fill the inside of the socks with the detergent water, and then leave the Base Layer to soak for 30 minutes
Step 4 - Wash and Rinse
- Keep the Base Layer flipped inside out
- Agitate and scrub gently with your hands
- Repeat until clean
- Rinse multiple times until free of detergent
- Avoid using brushes
- Flip the Base Layer the right side out and repeat the wash and rinse process
Step 5 - Let Dry and Store
- Flip the Base Layer inside out. Hang dry in a cool ventilated shaded area.
- Once the inside is dry, flip the Base Layer the right side out. Hang dry in a cool ventilated shaded area.
- Once completely dry, store in a cool, ventilated moisture-free place, away from house dust
- Do not wring. Do not tumble dry. Do not iron. Do not bleach. Do not expose to direct sunlight while drying.